Post by titusbm on Nov 5, 2006 21:36:37 GMT -5
In Table II-BER Equations, it lists the BER for MPSK modulations as
erfc[NEb/N0*sin^2 pi/M)^0.5.
I believe there should be a 0.5 multiplier in front of the erfc. Otherwise, the BPSK & QPSK result is BER=erfc[Eb/N0]^0.5 which is not correct. Please advise.
I'm trying to use this generalized result for modeling of 8PSK & 16PSK receivers.
Otherwise, this is great stuff. Please keep it up for all us "comm geeks" out here.
Bryan
erfc[NEb/N0*sin^2 pi/M)^0.5.
I believe there should be a 0.5 multiplier in front of the erfc. Otherwise, the BPSK & QPSK result is BER=erfc[Eb/N0]^0.5 which is not correct. Please advise.
I'm trying to use this generalized result for modeling of 8PSK & 16PSK receivers.
Otherwise, this is great stuff. Please keep it up for all us "comm geeks" out here.
Bryan